Tarot TL300N6 5.8G 48CH 1.6W FPV Video Transmitter 1600mW Drone VTX Designed with Adjustable Power

Tarot TL300N6 5.8G 48CH 1.6W FPV Video Transmitter 1600mW Drone VTX Designed with Adjustable Power

Description:
This is Tarot's newly upgraded 48CH, 1600mW 5.8G audio and video transmission system. Power can be adjusted in four levels. Using a 6061T6 aluminum alloy shell to dissipate heat, it is small and ultra lightweight. It is especially suitable for multi-rotor drones and long range FPV drones.

Features:
- 48-channel output can be switched via a button. Compatible with conventional frequency
- Provides 1-way video signal and 1-way audio signal input
- Provides 1-channel 5V/0.5A power supply output to power conventional cameras (please confirm the voltage and current of related equipment first to avoid burning)
- Compared with the previous generation of 600mW video transmitter, it increases the transmission power and the power is adjustable, greatly increasing the transmission distance. It is more suitable for image transmission over long distances
- 6061T6 aluminum alloy shell for heat dissipation enables more stable performance

Specifications:
Transmitter (Sky End):
- Input voltage: 7-36V DC (2-6S)
- Output voltage: including one-way 5V/0.5A
- Weight: 5.1g/0.01lb (without the weight of metal case and antenna); 14.3g/0.03lb (with the weight of case, but without the weight of antenna)
- Size (LxWxH): 41mm x 25mm x 8.5mm/1.6" x 1" x 0.3"
- Video format: PAL/NTSC
- Number of channels: 48CH/37CH (US region)
- Channel selection: With a frequency band/frequency point adjustment button. Long press the button for 3 seconds to switch frequency band and short press to switch frequency point
- Transmission frequency: 48CH/37CH (US). See the frequency table for details
- Transmit power: 32dBm±1dBm (1600mW)
- Power adjustment: With a button to adjust power. Short press the button to change power
- Power: 4 power levels, i.e. 25mW, 400mW, 800mW and 1600mW
- Antenna interface: MMCX
- Modulation type: FM

Attention:
1. Install the antenna first and then power on to avoid equipment failure;
2. Select the appropriate working frequency, and set the transmitter and your receiver to the same frequency (see the frequency table for details);
3. Because the power of the transmitter is large, do not touch the shell with your hands to avoid burns when it is working (it is normal for the shell to be hot and please use it with confidence);
4. The product can also be used normally if its shell is removed for installation due to the need to reduce the weight, but the transmit power will decrease slightly due to the increase in the temperature of the transmitter;
5. The input voltage is 7-36V (2-6S). Please not use it beyond the voltage range;
6. The output voltage and current is 5V/0.5A. Please pay attention to whether your camera is within the voltage and current range. If the current of the product is greater than the limit of 0.5A, please not use the voltage output terminal of this product, otherwise it may cause damage to the power supply module of the transmitter; 7.5V and 5V-OUT are outputs. Please not connect them to a power supply input or a battery, to avoid damage.

Package Included:
- 1 x 5.8G 1600mW video transmitter
- 1 x Transmitter cable/6P (100mm/3.9")
- 1 x Transmitter cable/3P (100mm/3.9")
- 1 x 5.8G antenna/MMCX
- 1 x 5.8G antenna extension cable/MMCX to SMA

Packaging Details:
- G.W.: 0.25kg

Note:
- Battery and receiver mentioned above are not included.