TEC Thermoelectric Cooler High Stability Cooling Module 12V/8A 45W for Temperature Control Object

TEC Thermoelectric Cooler High Stability Cooling Module 12V/8A 45W for Temperature Control Object

Description:
- The temperature control object module, which is the actual controlled object of the temperature control board, namely the load system of the temperature control board, includes copper plates, probes, refrigeration fins, and heat dissipation parts. The probe is used to measure the temperature of the copper plate, and the temperature control board controls the copper plate to stabilize its current temperature at the target temperature.
- A typical temperature control system is shown in the following figure. There are certain barriers and difficulties for users when using temperature control products. Users need to select the appropriate TEC based on their system requirements, then choose the appropriate model of temperature control board and power supply according to the TEC parameters, configure the target system, and communicate with the host to view the set parameters. The most troublesome part of this may be the configuration of the object system. The processing of TEC, placement and installation of probes, and so on all present certain difficulties.
- By using this product, users can avoid the difficulty of assembling and configuring temperature control object systems on their own, and can quickly apply temperature control products and verify temperature control systems. This product has a temperature controlled copper block with M3 threaded holes reserved on it. For some users who want to control the final object, it can be directly installed on the copper block to achieve temperature control, thus completely simplifying the application difficulty for users.

Features:
- Complete system of temperature controlled objects.
- Actual industrial laser, laser diode temperature control batch application.
- Imported temperature probe for EPCOS.
- Customize high-quality radiators.
- The object is pure copper nickel plating.
- High stability, <= +/-0.01 degrees.
- High configurability, DIY capability, based on which relevant components can be modified by oneself.
- Support our TCB-NE/NC/NA/NE-AH/NE-HH/SV/SA/SS products.

Application:
- The temperature control object of the temperature control system.
- Load system of temperature control products.
- Quick verification of temperature control system.
- Reference for temperature control system.
- Temperature control of laser diodes and similar components.
- High stability temperature substrate, temperature benchmark.
- Constant temperature objective table.

Specification:
- TEC rated voltage: 12V (15V max)
- TEC rated current: 8A
- Probe type: 10K NTC, B value of 3988, 1%
- Fan power supply voltage: 12V, +/-10%
- Fan power supply current: 0.5A
- Lead length: 40cm
- Temperature control stability: <= +/-0.01°, when using a temperature control board with a stability of +/-0.01
- Temperature control range: -10℃ ~ +85℃
- Maximum cooling heat (at room temperature, the target temperature is 25℃): 45W max
- Working temperature range: -50℃ ~ +85℃
- Heating rate at full output (rough data at room temperature): 1.4°/s @ turn off the fan, 1.2°/s @ turn on the fan
- Cooling speed at full output (rough data at room temperature): 0.9°/s @ turn off the fan, 1.1°/s @ turn on the fan
- Objective material: pure copper nickel plating
- Objective size (controlled object): 58 x 58mm, 7mm thickness
- Overall size: 85 x 90 x 75mm
- Net weight: 575g

Package Included:
- 1 x Thermoelectric Cooler