Tags: NX2s, Headphone Amplifier
| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $78.39 | $76.79 | $74.39 | $71.19 | Contact US |
New Original NC400 High-end Audio Power Amplifier Module 580W Ultra-low Distortion Amplifier for HYPEX
$104.21
New Original NC500 Audio Power Amplifier Module Ultra-low Noise and Distortion Amplifier Board for HYPEX
$196.11
Secondhand U-PRO2S 280W+280W Digital Class D Power Amplifier Board Ultra-low Distortion PWM Modulator for PSCAL
$74.72
Product Description:
- NX2 provide you smaller size than NX1 and built-in USB DAC, supports PC and most Android 4.0 and higher smart phone.
- NX2 uses OP+BUF structure.improve the push to 140mW(32ohm),the distortion decreases to 0.0003%,frequency response extend to 20-100KHz,bottom noise decrease to 2uV.
Features:
- Approx 100h playback time
- Built-in 16bit 48kHz USB DAC, Support Android 4.0 and higher smart phones (Some models does not support)
- Approx 9.2CM x 5.9CM x 0.9CM small size
- Complies with CE, ROHS and FCC
HIFI Electronic Components:
- ALPS Potentiometer
- WIMA Capacitance
Main unit Specifications:
- Analog input:1 x 3.5mm
- Headphone output:1 x 3.5mm
- Playback time:Approx 100 hours
- Net weight:Approx 74g (include battery)
- Colour:silver/black
- Signal input: 1 x 3.5mm headphone port,1 x USB Micro
- Dimensions:Approx 9.2CM x 5.9CM x 0.9CM
- Volume control:Audio special potentiometer
- Charge input:1 x USB Micro
- Battery capacity:1000mAh
- Endurable:40 hours(pure amplifier),5 hours(USB decode)
- Charging time:<4 hours
Audio performance characteristics:
- Output power:140mWx2 (RL=32Ω, THD+N=1%)
- Output voltage swing:7Vpp
- Typical THD+N:0.0006% (RL=32Ω, Pout=5mW)
- THD+N(@1kHz):0.0003% (RL=300Ω, Pout=5mW)
- Frequency response:20-100kHz
- Input sensitivity:1.285Vrms
- Bottom noise:2μV (RL=32Ω)
- Gain:5.6dB
- SNR:121dB(RL=300ohm)
- Recommend load impedance range:16-300ohm
User's manual download
USB decode specification:
- It can be taken as external sound card for computer,mobile.USB receiver chip uses SA9226,support 44.1KHz-192KHz/16Bit-32Bit (The PC needs to install drive.)
- It is compatible for iphone lighting interface,ipad.Android Mobile needs to have OTG function and support USB sound card,then it is compatible.
Package List:
- 1 x NX2s
- 1 x Audio cable
- 1 x USB cable
- 2 x Silicone band
- 5 x Velcro
- 1 x User's manual
