| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $46.42 | $45.48 | $44.05 | $42.16 | Contact US |
Finished 3D Printing Tracked Tank Chassis 6V 370 Reduction Motor Version Intelligent Tank Chassis Support DIY
$75.14
Assembled RC Tank Chassis Tracked Chassis DIY Climbing Car 3D Printing Load 5KG With Motors 370
$49.34
Assembled RC Tank Chassis Tracked Chassis DIY Climbing Car 3D Printing Load 3KG With Motors 280
$47.37
Tracked Robot Tank Chassis Shock Absorption Suspension Assembled DIY Toy Car 3D Printing w/ Motors
Description:
The 3D printed shock-absorbing crawler chassis uses fdm-style 3D printing. Load capacity 2.5kg-3kg.
This car uses two motors to separately control one side of the crawler, so at least four channels and more are required for remote control.
Fine-adjustable groove design makes gears fit properly. Double bearings run smoothly to avoid friction.
280 Motor Parameters:
- Size: 45*24*30mm
- Shaft diameter: 2mm
- Shaft length: 12mm
- Rated power: 7.2V 380MA 13500 rpm
- No-load voltage/current: 3V 250MA 6800 rpm; 6V 350MA 11000 rpm; 9V 420MA 16800 rpm
Package Included:
- 1 x Tank Chassis
Note:
- The 3D printed shock-absorbing crawler chassis uses fdm-style 3D printing, so the surface is not beautiful, rough, layered, slightly deformed, etc., but it is very strong. Please make sure that you don't mind before purchasing.
- This is only the car frame without battery or control system, but the motors pictured are included. It is a DIY product for customers.
- Voltage: 5-9V battery.
- It is assembled.
