| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $28.13 | $27.55 | $26.69 | $25.54 | Contact US |
Netherlands Module Hypex NC252MP Power Amplifier Board 2x250W 2-Channel Audio Amplifier Module
$481.46
DAS AERO12 Active Speaker DSP Preamplifier Motherboard Audio Input Board for Convert/Road/Avant/Aero Series
$93.60
5-Wire DC Brushless Fan Testing Board with Storage Box for Internal and External Fan Detection
$25.23
Transparent Fuel Cell 1.8V - 2.3V Educational Electrolysis Module with Single Electrolysis Membrane Electrode
Specification:
- Electrode: Single electrolysis membrane electrode
- Size: 56.8 x 30 x 46.5mm
- Weight: 63g
- Electrolysis area: 25 x 25mm
- Electrolytic voltage: 1.8V - 2.3V
- Electrolytic performance (water temperature: 25℃): 2.1V at current > 1A; 2.3V at current > 3A
- AEW: Purified water
- Electrolytic service life: > 3000 hours
Using steps:
- Add purified water into the water tank, and the water will enter the positive pole of the electrolysis module from the water tank.
- Connect the power supply and start electrolysis. The best voltage range is 1.8V-2.3V.
Precautions:
- Use purified water or deionized water (you can use for Ipoh purified water, which is available in supermarkets)
- The positive and negative electrodes of the battery shall not be connected reversely
- The applied voltage shall not exceed 2.3V
- The maximum electrolytic water temperature is not higher than 70 ℃
- The water level of the water tank shall be higher than that of the electrolysis module.
- Dry burning without water is strictly prohibited, or it will burn out.
Note:
- Please keep the electrolyte membrane wet when not in use.
- Regularly replace the water in the water tank (replace it every 3 days or every 100 hours)
Package Included:
- 1 x Fuel Cell Module
