TS-5W 5.8G 5000mW 56CH High Power 10-20KM Long Distance Wireless VTX Transmitter Module with 1200TVL Mini Camera

TS-5W 5.8G 5000mW 56CH High Power 10-20KM Long Distance Wireless VTX Transmitter Module with 1200TVL Mini Camera

Precaution:
- Distance: The reference distance without interference or obstruction in the air is about 10-20 kilometers. The ground has no interference or obstruction, and the reference distance is about 300-800m. Ideally, using directional antennas on the receiving device can increase the distance.
- The image transmission signal is a 5.8G signal, not a WIFI image transmission, and does not require WIFI or 4G signals when in use. The image transmission directly emits signals, so the transmitter generates a large amount of heat during operation. Please place the transmitter in a ventilated environment when using it.
- Attention: Image transmission does not support wall penetration, as any obstacles such as walls can seriously affect signal transmission.

Button Parameter Adjustment:
- After powering on and turning on the digital display, the last saved frequency band and channel will be displayed. Two buttons are used to adjust the channel CH and frequency band FR of the module, as well as a power on button. (Note: Make sure to turn on the antenna after it is installed, otherwise it will burn out the power amplifier IC)

A: Frequency Band Adjustment:
- At the initial startup state, press the FR button to adjust the current frequency band. Short press the FR button (about 0.5S) once to switch the frequency band from 1 to 2, and the digital display will switch from 1 to 2; Press the FR button briefly again (approximately 0.5S) to switch the frequency band from 2 to 3 and the digital display from 2 to 3... And so on, the frequency band is looped in A. B. E. F. R. L. X and the digital display in the loop of 1.2.3.4.5.6.7.

B: Channel Adjustment:
- Press the CH button to adjust the current channel, press the CH button briefly (about 0.5S) once to switch the frequency band from 1 to 2, and the digital display will switch from 1 to 2; Press the CH button briefly again (approximately 0.5S) to switch the frequency band from 2 to 3 and the digital display from 2 to 3. Repeat the cycle of frequency bands between 1.2.3.4.5.6.7.8, and the digital display will cycle between 1.2.3.4.5.6.7.8.

C: Power Activation:
- After confirming that the matching antenna is installed in place, press the power on button and the transmitter will start working normally.
- Be careful not to block the cooling fan window of the transmitter.

Camera Module Specification:
- Product name: 1200TVL mini camera
- Size: 22 x 22mm
- Format: PAL optional
  PAL: 976H x 582V
  NTSC: 976H x 494V
- Horizontal resolution: 1000TVL
- Video output: 1.0Vpp/75ohms
- AGC: 0.25/0.50/0.75/1.00 4-level adjustable, up to 55dB
- WB: on/off
- Exposure type: electronic exposure
- Electronic shutter: 1/50 (1/60) 1/100000 seconds
- Gamma correction: 0.45/1.0
- Synchronization: synchronization
- Lens: 2.5mm 130-degree
- Working voltage: DC 5 - 12V (wide voltage, measuring 5-13V)
- Working current: 70mA (power consumption)
- Working temperature: -20℃ to 60℃
- Humidity: 0% - 98%

Package Included:
- 1 x VTX Module
- 1 x Camera Module
- 1 x Accessory Pack