TXG4-RX40G Set 12V/24V 40A High Power Remote Controller Transmitter One-click Return for Trawl Boat

TXG4-RX40G Set 12V/24V 40A High Power Remote Controller Transmitter One-click Return for Trawl Boat

Features:
- Take control of your boats with ease using the RX40G wireless remote control Its one hand transmitter and bidirectional communication ensure a smooth and convenient control experience.
- The RX40G wireless remote control features a color screen and a long lasting for extended usage. Its adjustable working current and compatibility with various motors make it versatile for different applications.
- Designed for fishermen and boats operators, the RX40G wireless remote control provides precise control and convenience. It ensures reliable transmission and supports high loads, making it suitable for professional use.
- Elevates your boating adventures with the RX40G wireless remote control Whether you're navigating through challenging waters or patrolling water areas, this offer seamless remote control functionality to enhances safety and efficiency.
- Experience the of remote control with the RX40G wireless remote control Its advanced features and dependable performances make it an essential tool for marine enthusiasts, water patrols, and lovers.

Precaution:
- The TXG4 color screen version remote control is not compatible with the RX40G old version program. It cannot be used by purchasing the remote control separately and requires flashing.
- The positive and negative inputs cannot be reversed, as reversing the insertion will burn the motherboard. Input as 24V or 12V battery.
- When installing, the circuit board should face upwards with the arrow pointing towards the bow of the ship, and the GPS module should have the arrow pointing towards the bow of the ship with the antenna facing upwards. The GPS module should be kept away from the motor and magnetic interference.
- Waterproof measures should be taken to prevent water from entering the motherboard. It is best to wrap the remote control with plastic wrap to prevent water from entering, otherwise it may cause the remote control boat to lose control or burn out. The buyer shall be responsible for any damage caused by water ingress.
- Before use, carefully read the instruction manual, check the wiring carefully before powering on. When powering on, be sure to secure the ship and avoid the propeller, and be careful of scratches.
- Not compatible with remote controllers and motherboards from other manufacturers, need to be used in conjunction.
- When indoors or just turned on (GPS module needs to cool down and start for 30 seconds), the flashing lights may occur because there is no GPS signal. In this state, it is impossible to set fishing spots and return points, nor can it navigate to fishing spots or return.

Receiver Specification:
- Working voltage: suitable for both 12V and 24V lithium batteries, polymer batteries, and lead-acid batteries, 24V is recommended.
- Working current: 15 - 40A adjustable
- Applicable motor: it can drive motors such as 775, 795, 895, 997, etc.
- Positioning precision: about 5m
- Remote control distance: on water 500m
- Overcurrent protection: yes, the overcurrent protection value is adjustable, and when overcurrent occurs, the lighting flashes to remind.
- Remote control weak signal alarm: yes, the remote control indicator light is flashing, with a flashing frequency of 0.2 seconds.
- Boat low electricity alarm: yes, the remote control indicator light flashes at a frequency of 0.5 seconds, intelligent judgment of battery voltage and number of cells.
- Remote control low electricity alarm: yes, the remote control indicator light is flashing, with a slow flashing frequency of 2 seconds.
- Servo interface: remote control for forward and reverse rotation
- Power interface: Consistent with battery voltage, controlled by hardware switches.
- Drainage pump interface: Consistent with battery voltage, hardware switch control.
- Decoupler interface: Consistent with battery voltage, remote control, automatic release in 2 seconds
- Searchlight interface: Consistent with battery voltage, remote control
- Receiver size: 103 x 82 x 33mm
- Net weight: approximately 245g
- Packaging weight: approximately 285g

Remote Controller Specification:
- Power supply method: chargeable battery 1500mAh, 18 hours duration.
- Remote control screen: 1.54-inch HD color screen
- Fishing spot number: 24 fishing spots + 1 point of returning (only for GPS version)
- Communication method: bidirectional communication, power, distance, wireless information bidirectional transmission.
- Remote control distance: 500m
- Remote control power consumption: 80mA
- Remote control size: 147 x 47 x 50mm
- Remote control weight: 103g
- GPS version: support one-click returning, 24 fishing spots, hardware with GPS + compass module
- Without GPS version: it does not support one-click return, signal loss return, navigation to fishing spot cannot be set, and the hardware does not come with GPS + compass module.

Package Included:
- 1 x Remote Controller
- 1 x Motherboard
- 1 x Antenna

Note:
- Battery is not included.