U22 Flight Control Mainboard for Multicopter FPV Photography

U22 Flight Control Mainboard for Multicopter FPV Photography

Description:
- Adding PPM3 wire connection mode serial receiver function (433 Xinjiang nut cake support JR, FUTABA, and Wakel, flew all remote serial format), connect the PPM port 433 Xinjiang nut cake receiver, RSSI can synchronize data transmission, and can realize automatic control of return. No need to set out of control protection
- Adding fence mode (if it is beyond setting distance, it will automatically return home)
- Adding hovering mode, this mode switch at any time, the aircraft according to the set radius circling flight (circling direction controllable)
- Adding flight records (the end of the flight, flight, the fastest, the highest flight number far, flight records)
- Adding take-off mode (set off angle, can delay the starting power for aircraft catapult, function)
- Home position can be choosed, (Automatic: it will store current position as home position when powered on, Manual storage: unless you change the home positition, it is fixed)
- All parameters OSD interface, all Chinese setting, easy to understand
- Automatic throttle (under height mode, return mode, navigation mode, hover mode, according to the flight height difference, automatic adjust aircraft power)
- Adding rudder control, aircraft, flying wing, normal mode optional V tail and other types
- Flight mode for 7 waypoints, two sets, can use the distance azimuth setting, you can also GPS accurate coordinates adjustment, accurate point setting, data synchronization update settings
- Automatic throttle. Under self driving (return home navigation, navigation point) mode or height set mode, it will automatically adjust aircraft driving functions based on the height and automatic throttle
- Adding airspeed tube interface
- Adding telemetry interface

Package includes:
- Flight Control Mainboard x 1