UH200 V1 24S ESC 200A Drone ESC With Multiple Protections For Agricultural Drones Brushless Motor

UH200 V1 24S ESC 200A Drone ESC With Multiple Protections For Agricultural Drones Brushless Motor

Features:
- Quick response. it will take only 0.65 seconds from starting motor to full speed running.
- Good compatibility and stability with special control algorithm for disc motors.
- Synchronous freewheeling technology can bring better throttle linearity, driving efficiency and automatic energy recovery when lowering motor speed.
- Have output interfaces of RPM and error signal.
- With 485 communication interface, it can communicate with the flight controller in real time. (Note: This feature needs to match the flight controller).
- Convenient installation screw holes without considering ESC part front and back sides.

Protection Functions:
- Over Current Protection: Once checking current is more than 240A and lasts 3 seconds, ESC will shut off power output, and will resume normal after making throttle zero.
- Short Circuit Protection: Once checking instant current is more than 400A, ESC will power off, and will rework after trouble shooting and powering again.
- Stalling Protection: Motor stall will trigger stalling protection. ESC will resume after making throttle zero and powering again.
- Voltage Protection: Once checking voltage is less than 40V or more than 105V, ESC will alarm and will not start up motor. But it will be out of effect during flying.
- Temperature Protection: When checking temperature is higher than 110 centigrade degree, ESC will output error signal. Once temperature exceeding 140 centigrade degree, ESC will shut off and will resume normal after making throttle zero.
- Throttle Loss Protection: As checking throttle signal loss over 0.3 seconds, ESC will shut off and will rework after throttle signal recovery.
- Start Protection: When motor is not started up after adding throttle for 10 seconds, ESC will shut off and will resume normal after making throttle zero.
- Throttle Stroke Setting: First connect motor and adjust throttle top, then power on and ESC will beep two times. Second adjust throttle bottom and ESC will beep one time. After finishing these steps, throttle stroke will be set successful.

ESC Parameters:
- Model: UH200 v1
- BEC: No
- PWM Input Signal Voltage: 3.3V/5V(compatible)
- Online Update: not available
- Throttle Loss Protection: available
- Phase Short Circuit Protection: available
- Size(L*W*H): 161*72.2*46.8mm
- Power Line: 8AWG

- Battery Section: 12~24S (not included)
- Recommended Battery: 24S (not included)
- Compatible Signal Frequency: 50-500Hz
- Current Protection: available
- Stall Protection: available
- Error Signal Output: available
- 5V/300MA output: available
- Motor Line: 8AWG

- Continuous Current: 200A (under good cooling conditions)
- Instant Current: 240A (under good cooling conditions)
- Throttle Pulse Width: default 1100us-1940us, throttle adjustment is available. Voltage Protection: available / 485 communication: available
- Temperature Protection: available
- Speed Signal Output: available
- Weight(without lines): 580g
- Working Environmental Temperature: -20 to 65 ℃

Package Included:
- 1 x Set of ESC

Note: Battery is not included.