USR-C210 Serial to WiFi Module Converter Data Transparent Transmission AP STA AP+STA Mode Internal Antenna

USR-C210 Serial to WiFi Module Converter Data Transparent Transmission AP STA AP+STA Mode Internal Antenna

Description:
-USR-C210 hardware integrates MAC, baseband chip, radio frequency transceiver unit; built-in low-power operation mechanism, which can effectively realize the low-power operation of the module.
S-upport WiFi protocol and TCP/IP protocol, users only need simple configuration to realize the networking function of UART device.
-The module size is small, and it is easy to solder and install on the hardware single-board circuit of the customer's product.

Internet Parameters:
Standard: 802.11 b/g/n
Network mode: AP/STA/AP+STA
Number of access terminals in AP mode: 3
Frequency range: 2.412GHz~2.484GHz
Transmit power: 802.11b:+18 +/-1dBm(@11Mbps); 802.11g:+17 +/-1dBm(@54Mbps); 802.11n:+15+/-1dBm(@HT20, MC37)
Receiving sensitivity: 802.11b: -85dBm(@11Mbps, CCK); 802.11g: -70dBm(@54Mbps, OFDM); 802.11n: -68dBm(@HT20, MC37)
Transmission rate: 802.11b: 11Mbps; 802.11g: 54Mbps; 802.11n: 54Mbps
Transmission distance: internal maximum 160m (open line of sight)
Security mechanism: WEP-A/WPA-PSK/WPA2-PSK
Antenna interface: internal: on-board antenna

Serial Port:
Number of ports: 1
Interface standard: TL serial port: 3.3V
Data bits: 7, 8
Stop bit: 1,2
Check Digit: None, Even, Odd, Space, Mark
Baud rate: 1200bps-460800bps
Flow control: RIS/CTS
Buffer: Receive 1K bytes

Software:
TCP Server. Maximum TCP number: 5
Wireless network type: AP, STA, AP+STA
Security mechanism: WEP/PA-PSK/WPA2-PSK
Encryption type: TKIP, AES, TKIP/AES
Network protocol: IPv4, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP
User configuration: AT+ command set, web page configuration

Basic Parameters:
Size: 18.22×26.65×2.8mm
Working temperature: -20~85℃
Storage environment: -40~125℃, 5-95% RH (no condensation)
Working voltage: DC 3.0~3.6V
Working current: AP: average 74mA, peak 285mA@3.3V; STA average 32mA, peak 196mA@3.3V
Certification: CE, FCC, ROHS, WEEE

Functions:
-It can work in AP mode and wait for other WIFI devices to access communication. It can access 3 STA at the same time, or it can work in STA mode.
-Connect wireless router to realize communication.
-With a Socket communication link, which can be set to TCP Server, TCP Client, UDP Server, UDP Client communication.
-The Socket can support 5 TCP Client access in TCP Server mode
-The module supports UART transparent transmission and can be switched arbitrarily using AT commands.

Features:
-Support Wi-Fi@2.4GHz 802.11b/g/n wireless standard.
-Support WEP, WPA/WPA2 security mode.
-Support AP, STA, AP+STA working mode.
-Fully integrated serial port to wireless TCP/UDP transmission function, multiple serial port rate options.
-LAN search and wireless parameter setting function.
-Support TCP/UDP Client registration package mechanism.
-Support Simplelink/usrlink fast networking configuration.
-Support RFC2217-like automatic baud rate adaptation function.
-Support simple AT+ command set configuration.
-3.3V single power supply.
-Ultra-low power consumption mode, support deep sleep.

Package List:
1 x USR-C210 Module