USR-TCP232-S2 SMT Serial UART TTL to Ethernet TCP IP Converter Support Built-in Webpage

USR-TCP232-S2 SMT Serial UART TTL to Ethernet TCP IP Converter Support Built-in Webpage

Introduction    
USR-TCP232-S2 is a tiny size SMT serial Ethernet module which can realize data bidirectional transparent transmission between TTL and Ethernet Port. It can also be applied in RS232/ RS485 by level shift circuit.USR-TCP232-S2 is based on Cortex-M0 core. It has characters of low power, fast speed and high efficiency.

Function    
- Auto-MDI/MDIX, RJ45 port with 10/100Mbps
- Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client
- Serial port baud rate from 600 bps to 460.8 Kbps, Check bit of None,Odd,Even,Mark and Space
- Self-defined heartbeat package mechanism to ensure connection is reliable, put an end to dead link
- Self-defined registration package mechanism, check connection status and use as custom packet header
- Under TCP Server mode, Client number ranges from 1 to 16; default number is 4
- User can set parameters via webpage, AT command, serial protocol and network protocol; and setting protocol is provided, users can integrate it to their own software
- Support DHCP, automatically obtain an IP address
- Support DNS function and custom setting of DNS server
- The global unique MAC address bought from IEEE, user can define MAC address
- Upgrade firmware via network
- Support virtual serial port and provide corresponding software USR-VCOM
- Restore factory default via software and hardware
- Across the gateway, switches, routers
- Can work in LAN, also can work in the Internet (external network)
- Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS
- Support customization

Parameter    
- Input Voltage: DC 3.3V
- Current: 150mA (aver), 200mA (max)
- Size: 33 x 20.3 mm    
- Operating Temp: -25 ~ 75°C
- Storage Temp: -40 ~ 105°C, 5 ~ 95% RH    
- Interface : TTL UART
- Network Protocol: IP, TCP, UDP, DHCP, DNS, HTTP, ARP, ICMP    

Package List:
- 1 x Module