VSENSOR USB HART MODEM WS232UP HART Communicator USB to HART with 24V DC and Built-in Loop Resistor

VSENSOR USB HART MODEM WS232UP HART Communicator USB to HART with 24V DC and Built-in Loop Resistor

Description:
The Brand New USB to HART Modem WS232UP, USB Hart Protocol Transmitter HART Convertor, supports for Windows 98/2000/XP/7/8/10. The HART Signal Communicator is designed with built-in 24VDC & loop resistor, which is suitable for all devices which support Hart protocol.

It provides a complete and flexible PC communication link to HART networks and power kit and loop resistor, for commissioning, servicing, calibrating, and acquiring data from any HART instrument or transmitter. The WS232UP is developed based on BELL202 modem standard, this external interface is rugged and compact and ideal choice for field service, commissioning, engineering, training, table top shows, lunch and learns and demo cases.

Its updated software Ver2.0 is compatible with systems for Win98, XP, Win7, Win8, MacOS, Linux, etc.

Features:
- Fully HART compliant for communication with any HART instrument and error-free slave testing
- DC-DC isolation power draws from USB port and needs no external power supply
- Three modes: 1) 24VDC/270Ω. 2) Normal. 3) 270Ω. The mode is easily slide-switch selected so you'll always have a power supply or loop resistor with you
- Easy installation and use: this modem can power all 2-wire HART devices-independent of supplier
- Rugged aluminium alloy case gives you industrial-grade reliability in a small package
- Free HART application software for you to configure your HART devices
- Smart design: smaller than a normal name card

Specifications:
- Power Supply: Powered by USB port. Does not require external power supply
- Current consumption: minimum 30mA at +5V; maximum 250mA at +5V
- Interface: USB-A connector, compliant for USB2.0/1.1
- HART connection: 2 test clips (red and black)
- Output signal: 0.5±0.1Vpp sine wave at 1200/2200Hz
- Isolation: 6.5KVDC, 4.6kVrms between instrument and device
- Operating system: for Win98, Win2000, Win XP, 32-bit or 64-bit Win7, Win8 and Win10
- Demodulation Jitter: 12% of 1 bit typical
- Leakage process loop: ±10uA Max.
- Operating Temperature: -25 to 55℃ (-32 to 131℉)
- Storage Temperature: -40 to 85℃ (-40 to 185℉)
- Storage Humidity: 0% to 95% relative humidity (No condensing)
- Option Mode: Slide-switch for selection: 1. 24V/270Ω; 2. Normal; 3. 270Ω
- Enclosure: Aluminium alloy; color: Sky blue
- Size: 63x52x22mm/2.5x2x0.9"; weight 120g/0.3lb (include cable)
- USB cable: length 1m/3.3ft; USB-A connector
- Test cable: length 1.5m/4.9ft; two test clips (red and black)

Packing List:
- 1 x USB Hart Modem
- 1 x Pouch
- 1 x Manual

Note: If you download the driver file, please contact us.