Waveshare USB-CAN-FD Industrial CAN Bus Analyzer USB to CAN Adapter Support High Speed CAN FD and CAN2.0A/B Data Communication

Waveshare USB-CAN-FD Industrial CAN Bus Analyzer USB to CAN Adapter Support High Speed CAN FD and CAN2.0A/B Data Communication

Description:
- The USB-CAN-FD is an industrial-grade high-performance USB to CAN FD adapter, CAN/CAN-FD bus communication interface card, and CAN/CAN-FD protocol data analyzer. Onboard dual independent CAN FD interfaces with electrical isolation and multiple protection circuits. Supports for Windows XP/7/8/10/11 system, comes with drivers, CAN FD Tools related software, secondary development examples, and tutorials.

- It can be connected to the PC or industrial control host via a USB port to realize transceiver control, data analysis, collection and monitoring of CAN/CAN FD bus network. It is compact in size and easy to use, which can be used for learning and debugging of CAN/CAN FD bus, as well as for secondary development and integration into various industrial, power communication, and intelligent control applications that require CAN/CAN FD bus communication.

Features:
- Onboard high-speed USB2.0 interface and 2-CH CAN/CAN FD bus interface, support bidirectional transmission, can work independently without interfering with each other.
- CAN baud rate is configurable in the range of 100Kbps ~ 5Mbps, support baud rate calculation, auto-detection, and setting via the configuration tool.
- Support CAN 2.0A, CAN 2.0B, ISO11898-1, and CAN FD protocol specification V.1.0, supports standard and extended frames.
- Provides examples for secondary development projects on various mainstream development platforms: for C#, for VC, for Delphi, for Qt, for LabVIEW, for Python/Python-Can.
- Adopts high performance microchip original controller and 32-bit for MIPS M4K core, up to 80MHz frequency, stable and reliable.
- Adopts high-speed signal isolators, DC - DC dual power isolation, USB, CAN1, and CAN2 three terminal full isolation, higher communication security and stability.
- Supports one PC to run multiple CAN FD analyzers at the same time without interfering with each other, up to 128 devices after testing. It is suitable for monitoring multiple CAN networks at the same time with one monitoring devices, or for data comparison and verification and so on.

Specification:
- Product type: industrial grade: USB to CAN FD interface converter, CAN/CAN FD bus communication interface card, CAN/CAN FD protocol data analyzer
- USB:
Operating voltage: 5V (directly powered by USB port without external power supply)
Connector: USB-B

CAN/CAN FD interface:
- CAN/CAN FD channel: dual-channel: CAN1 and CAN2 (independent and full-isolated, isolated voltage: 3000VDC)
- Connector: CAN bus screw terminal (PEN6 5.08mm pitch)
- Terminal resistor: each CAN/CAN FD channel has two built-in 120ohm terminal resistor, which can be enabled by switch
- Baud rate: 100Kbps ~ 5Mbps(Configurable via software)
- Protocol support: CAN2.0A, CAN2.0B, and ISO 11898-1 CAN FD protocol V1.0
- Transfer speed: the receiving and sending speed of each CAN/CAN FD channel can reach 20000 frames/s and 5000 frames/s
- Transmit buffer: 1500 frames receiving buffer and 64 frames sending buffer per channel (automatically retransmit when the transmission fails)

Indicators:
- PWR: power indicator
- SYS: system status indicator, normally off, keep on when there is a bus error
- CAN1: CAN1 channel indicator (blinking when sending and receiving data)
- CAN2: CAN2 channel indicator (blinking when sending and receiving data)

Others:
- System support: for Windows XP/7/8/10/11 (32/64bits); does not support for Linux system now, and the related drivers are under development.
- Operating temperature: -40 ~ 85℃
- Case material: aluminum alloy case + 3D flame-retardant insulating sheets on both sides (this design can provide better protection against metal tip discharge, also improves product safety, and extends service life)
- Dimensions: 104 x 70 x 25mm

Package Included:
- 1 x USB-CAN-FD
- 1 x USB Type-A to Type-B Cable
- 1 x 4Pin Cable
- 1 x Screwdriver

Note:
- For Raspberry Pi 4B and 2-CH CAN FD HAT displayed in the picture are not included.