WB-SG1-4.4GP Wideband Signal Generator 1Hz-4.4GHz RF Signal Source Pulse Width 1Hz-1M/10NS-0.16S

WB-SG1-4.4GP Wideband Signal Generator 1Hz-4.4GHz RF Signal Source Pulse Width 1Hz-1M/10NS-0.16S

Specifications:
- Item name: Pulse RF signal source
- Model: WB-SG1-4.4GP
- CH1 frequency range: 1Hz-250MHz
- CH1 frequency step: 1Hz-19.999999MHz/1Hz and 20MHz-250MHz/10Hz
- CH1 pulse width range: 10ns-0.16s
- CH1 pulse step/accuracy: 10nS/10nS
- CH1 output amplitude: 3.3Vpp
- CH1 output waveform: square wave
- CH1 interface type: BNC
- CH2 frequency range: 9kHz-4.4GHz
- CH2 step: 0.5KHz
- CH2 output impedance: 50 ohms
- CH2 harmonic: better than 12DBC
- CH2 modulation method: on-off modulation
- CH2 modulation frequency/pulse width: 1Hz-2MHz/10nS-0.162S
- CH2 output power: -40dBm to +13dBm/step 0.5dB
- CH2 amplitude accuracy: 9K-4G/3dB
- CH2 interface type: SMA
- Internal reference frequency: 10MHz
- Internal reference type: OCXO
- Internal frequency standard aging: 0.5Hz/year
- 10M reference output power: 5dBm
- External reference input power range: 0dBm to +20dBm
- Frequency accuracy: benchmark 10M±0.05Hz, other frequencies are normalized to 10M
- Operating mode: CH1 dot frequency mode; CH2 dot frequency mode; CH1 sweep frequency mode; CH2 sweep frequency mode

Front Panel:
Mode: Operation mode conversion
ENT: input data
< > ˄ ˅: Left, right, up and down keys
CH1: Channel 1 output
CH2: Channel 2 output

Rear Panel:
10M REF INPUT: external 10M reference input
10M REF OUTPU: 10M reference output
USB: USB communication port
STD ADJ: internal OCXO frequency fine tuning
With a switch
With a DC socket
 
Other Parameters:
- Power supply: 11.7-12.5V. Startup: <0.5A, stable: <0.25A
- Dimensions: 106 x 55 x 143mm/4.2 x 2.2 x 5.6"
- Weight including host and adapter: 700g/1.5 lb
- With a DC12V power supply

Package Included:
- 1 x Set of RF Signal Generator