WHEELTEC DC Motor PID Learning PID Controller Kit Suitable for STM32 Encoder Position Speed Control

WHEELTEC DC Motor PID Learning PID Controller Kit Suitable for STM32 Encoder Position Speed Control

Product Information:
- Item name: DC Motor PID Learning Kit
- Functions: Learning of DC motor position, speed control, PID parameter setting, etc.
- Hardware: DC motor with encoder, all-metal motor bracket, flange, controller, data cable, etc.
- User: for users who are interested in DC motor control and PID and need further study
- Weight: 427g/0.9lb
- Support for Simulink

U-shaped Metal Motor Bracket:
- It can be placed on a desk
- Desktop-class learning kit
- Suitable for laboratories, dormitories and homes
- Very easy to carry

12V Motor Parameters:
- Rated voltage: 12V
- Rated power: 4.32W
- Motor type: permanent magnet brush motor
- Stall current: 2.8A
- Stall torque: 6.6kg.cm
- Rated current: 360mA
- Rated torque: 0.66kg.cm
- Speed before deceleration: 11000rpm
- Speed after deceleration: 549±15rpm
- Reduction ratio: 1:20
- Output shaft: 6mm/0.2" diameter, D-axis eccentric shaft

Encoder Parameters:
- Type: AB phase incremental Hall (magnetic) encoder
- Number of lines: 260 (measured by reducer output shaft)
- Supply voltage: 5.0V
- Special function: Comes with pull-up shaping, and MCU (for STM32, 51, Arduino, etc.) can be read directly
- Interface Type: XH2.54 (with cable)

Packing List:
- 1 x Controller
- 1 x Encoder motor
- 1 x Metal motor bracket
- 1 x Flange coupling
- 1 x XH2.54 FFC cable
- 1 x OLED display
- 1 x Type C data cable
- 1 x DC power cable

Note:
- It has been assembled and debugged. It is ready to use.