WiFi Solar Power Outdoor Camera 2MP 1080P PIR Motion Sensor with Solar Panel (Primary Color)

WiFi Solar Power Outdoor Camera 2MP 1080P PIR Motion Sensor with Solar Panel (Primary Color)

Two-Way Audio. Real-time communication with visitors. Will not miss any visitors anywhere. The camera has a video recording function, and the sound is synchronized when viewing and playing back the video recording screen. Voice intercom during real-time monitoring.

Camera Parameters:
- Master: For Hisilicon Hi3518EV200
- Image sensor: For 2MP 1080P COMS Sensor PS2063 1/2.7
- Video stream: 1920*1080/15fps; 640*360/30fps
- Video mode: normal mode, backlight compensation, infrared night vision, strong light suppression, digital wide dynamic
- Night vision effect: Infrared night vision (black and white screen)
- Infrared distance: 940nm infrared, effective lighting distance is about 10 meters
- Lens: For 2G2P HD lens 4mm horizontal FOV, 120 degrees
- Battery: 2 * 18650 ternary lithium 3.7V battery (Batteries are not included)
- Charging: can be equipped with solar panel charging, support 5V USB port for about 6 hours to fully charge
- Sleep: 15S/30S/60S/do not sleep
- WiFi connection: One-click sound wave configuration 2.4GHz
- AP hotspot: support
- 4G connection: not supported
- Audio encoding: AAC and G.726
- Audio MIC: high sensitivity -38dB
- Video format: MP4
- Operating temperature: -30℃ to 50℃
- Operating humidity: ≤80% RH

Functions:
- Event alarm: support
- Buttons: WiFi/AP hotspot button; reset button/power supply button
- Status indicator: blue & red LED
- Storage: Support TF Card 4GB-64GB and cloud storage
- Video playback: Timeline playback and cloud storage playback
- Waterproof level: IP67
- Two-way intercom: support
- APP mobile phone system requirements: For IOS 10.0, Android 5.0

Solar Panel Parameters:
- Maximum output: 3.3V/1A; output over-source protection; short-circuit protection
- Charging method: Solar charging/external input power charging
- Peak power (PMAX): 3.3W
- Solar charging current: 1000mA
- Supports three booting methods:
1. Detects that the solar output is greater than 0.2W and automatically turns on
2. Press the button to start manually
3.Detect the load and turn on automatically
- Power management function:
1. To prevent from entering an invalid charging state
2. The conversion rate of power output exceeds 91%, which greatly reduces the loss of limited power
- Type of silicon wafer: single crystal efficiency 19.6%
- Number of silicon wafers: 10pcs
- Cable length: 3m cable with micro usb charging head
- Support: M6 screw interface
- Charging completion time: about 3 days in sunny days
- Working temperature: -30℃ to 65℃
- Storage temperature: -30℃ to 65℃
- Waterproof rating: IP66
- Product size: 150 * 220 * 17 mm
- Weight: 415g

Package Included:
- 1 x Set of Solar Power Security Camera

Note:
- Batteries are not included in the package.
- The product does not come with a memory card and hard disk by default. If needed, please purchase separately. Thank you!