Wireless RF Transceiver Module 915MHz CC1101 CC110 Remote Control Arduino Robot

Wireless RF Transceiver Module 915MHz CC1101 CC110 Remote Control Arduino Robot
Description:
- Micro-power wireless data transmission module.
- Using high-performance TI-Chipcon's CC1101 wireless commucications chip.
- The maximum transmission data rates up to 500Kbps, rate can modify by  software.
- Coverage up to 300~500 meters in open areas.
- with a wireless wake-up features, sensitivity to -110dBm, high reliability.
- working in the 915MHz frequency band. Compliance  ETSI（EN300-220-1 &  EN301-439-3), Compliance the requirements of wireless control, no need to  apply frequency usage license.
- (Docs & Setup  software will sent to your ebay email box upon you purchase)
- Both SMA & helical antenna available for buyer's choice:

Specification:
-  Operating voltage: 1.8V ~ 3.6V   (recommended 3.3V)
-  The maximum rate of 500kbps, support for 2-FSK, GFSK and MSK modulation.
-  Setup softwafe can modify  Rate, Power, Frequency.
-  High sensitivity (1.2Kbps under-110dBm, 1% packet error rate)
-  Built-in hardware CRC error detection, and address control.
-  Programmable control of output power, up to +10 dBm.
- Wireless wake-up functionality to support low-power electromagnetic  activation, wireless wake-up low-power sleep state of the equipment.
-  Support the transmission channel before the auto-clean-up visits (CCA), the  Carrier Sense System.
- Fast frequency changes brought about by a suitable synthesizer frequency  hopping system.
-  Module can be software-based address, software programming is very  convenient.
-  Standard 2.0mm DIP spacing interfaces for embedded applications.
-  Separate 64-byte RX and TX data FIFO.
- Transmission Distance: open to the actual transmission distance 250-300  meters (depending on the specific situation of the environment and  communication baud rate settings.
-   Dimensions: 29 mm (L)  x  16 mm (W)  x  1 mm (H).

Package include:
- 1x915mhz cc1101 Module with External Antenna