| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $84.75 | $83.02 | $80.43 | $76.97 | Contact US |
GT235 Coating Thickness Gauge with 0-1800μm Range for Iron and Aluminum & Automobile Paint Surface
$52.39
Fardriver ND72530 72V BLDC Controller Brushless DC Controller 8000W Rated Power for Electric Scooter
$249.39
Nanjing Fardriver IPMSM Controller ND72200 72V 50A/200A IPMSM Controller Sine Wave Controller for Electric Scooter
$72.71
WOYO PDR100 Slide Hammer Dent Puller Professional Automotive Repairing PDR Tools with 3PCS Steel Tabs
Description:
- The WOYO Slide Hammer Dent puller kit idea for the sheet metal processing, auto body dent removal or hail damage repair.
- Easy operate to fix ding dent and hail damage repair with lowest expense in convenient way.
- Use with Cold Glue (not included), not need to heating the glue and waste the time.
- Auto body tools slide hammer and attachments are for dent pulling, removals, can also pulls out dents in fenders, side panels.
- This type of cold glue (not included) can be reused. When you use it, make sure the dents and your fingers are clean.
- Handle design: increases friction, which is more convenient to use.
- Three size of the tabs, suit for many kinds of dent. Attention: manual measurement, please allow an error of 1-5mm.
Support Dent Shapes:
- It only suit for soft and smooth dent without access to the edge.
- If you need to repair the dent with access to the edge, you need to use with other assist tool.
How to use PDR100 to remove the big dent on the car?
- Clean the car dent place.
- Choose the tabs size you need ,and then install it .
- Clean you hand, Stick cold glue on the tabs after heat the tabs.
- If your Car body is cold, we suggest you to clean and heat the dent before use the slide hammer.
- Start to repair the dent, try several times until cannot pull the dent.
- When the dent can't be pulled up and not been repaired completely.
If the dent still have other shapes or mini dent, need to use other auxiliary PDR tools to repair it.
Like PDR007 / PDR009 / Rods hook / rubber hammer / other PDR kits.
- After Finishing repairing, remove the cold glue from the tabs, confirm it clean and back to the original glue.
Package Included:
- 1 x Slide Hammer
- 3 x Steel Tabs
Note:
- The cold glue is not included due to the shipping requirements, please prepare it by youself. Thank for your understanding.
