| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $46.10 | $45.16 | $43.75 | $41.87 | Contact US |
Willsenton R8 KT88 45W+45W Vacuum Tube Integrated Amplifier Push-pull Power Amplifier (Black)
$1,621.96
Willsenton R8 KT88 45W+45W Vacuum Tube Integrated Amplifier Push-pull Power Amplifier (Silver)
$1,621.96
Willsenton R-800i Single Ended Class A Amplifier Vacuum Tube Integrated Amplifier 50W+50W 300B + 805
$2,912.97
X883 High Performance Storage Expansion Board for Raspberry Pi 4 Dual 2.5inch SATA HDD/SSD Shield
Description:
- This is an ultra-compact raspberry pi 4 dual 2.5 inch SATA HDD/SSD storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. The Super-speed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.
- More details: wiki.geekworm.com/X883
Note:
- Raspberry pi, 2.5" SATA SSD/HDD, power adapter are all not included.
- Due to installation restrictions, please pay attention to the thickness of 2.5" SSD/HDD.
- As with all SSDs, new SSD/HDD must be formatted before use.
- Older SSD drives with less efficient flash media may not perform as well as newer drives.
Features:
- Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield, supports UASP NOT trim.
- Supports dual 2.5 SATA HDDs/SSDs working at the same time.
- The newly designed USB connector can transmit more reliably.
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers.
- Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac.
- Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi.
- Fully compatible with X765 for powering over Ethernet (POE, 5V 5A).
- Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 6A, smart power mgmt).
How to power:
- Since X883 can install two 2.5-inch hard drives, it needs a high-quality power supply to provide enough current. Please use high quality power adapter that with inner protection, the low quality PSU may damage the X883 board and not recognized the HDD/SSD.
- Power supply: 5Vdc +/-5% , ≥4A
- Ports & Connectors: DC jack - 5.5x2.1mm
(Note: DC5525 Jack is compatible with DC5521, so you can also use the PSU with DC5525 Jack)
Package Included:
- 1 x X883 Expansion Board
- 1 x Carrier Board X883-A1 (To mount raspberry pi on X883)
- 1 x USB 3.0 Connector
- 1 x 2-Pin Power Connection Wire
- 1 x Screws Pack
- 1 x Power board
