XCNet-PN-S Ethernet Module (Rubber Rod Antenna) S71200/1500 to S7TCP/ModbusTCP (Wireless) Data Acquisition Module for Siemens

XCNet-PN-S Ethernet Module (Rubber Rod Antenna) S71200/1500 to S7TCP/ModbusTCP (Wireless) Data Acquisition Module for Siemens

Description:
- XCNet-PN-S is a high-performance protocol conversion gateway designed to meet the growing needs of factory equipment informatization (equipment Network monitoring and production management). It is used for Ethernet data acquisition for Siemens PLC with Ethernet interface (S7-1200/1500, S7-300PN, S7200 SMART, etc.) and for Siemens Ethernet modules (CP243-1, CP343-1, etc.), which is very convenient for building the production management system. The module integrates WiFi functions and supports AP mode, STA mode, and AP+STA mode. It comes with a rubber rod and magnetic antenna, making it easy to build a WiFi network. PLC programming, data acquisition, data exchange, and cross segment access can be directly carried out through WiFi.
- The LAN1/LAN2/WiFi of XCNet-PN-S has cross segment functionality, which can convert the S7TCP protocol of the LAN1 port into the ModbusTCP protocol of the LAN2/WiFi interface and the BCNetS7 (S7TCP/IP) protocol. LAN2/WiFi supports ModbusTCP master slave communication function.

Features:
- Installed on a 35mm guide rail, LAN1 is a four port RJ45 with switch function, which is connected to the PLC; LAN2 is a single port RJ45 that can be connected to a touch screen or upper computer system; WiFi external high gain antenna, which can be connected to the upper computer; XCNet is powered by an external 24VDC power supply.
- Integrated WiFi function, supporting AP mode, STA mode, and AP+STA mode.
- PLC programming, data acquisition, data exchange, and cross network segment access can be achieved through WiFi.
- Integrated WEB server, device parameters can be set and diagnostic can be run through web pages; It can also be configured through the BCDevice tool; You can configure it from the LAN1/LAN2 interface or WiFi at will.
- Implement NAT function, the module can be configured with 4 groups of forwarding ports, each group of forwarding ports can have multiple TCP or UDP connections.
- For SmartIE series touch screens can be connected to PLCs such as S7-1200 and S7-1500.
- The LAN2/WiFi interface can support the ModbusTCP server function, and can map the PLC connected to the LAN1 interface to the ModbusTCP server of the LAN2/WiFi interface.
- The LAN2/WiFi interface can implement TCP clients, based on ModbusTCP or S7TCP protocols, to achieve data exchange between PLCs and ModbusTCP instrument data reading.
- The LAN2/WiFi interface can support the BCNetS7 protocol server function, and can map the PLC connected to the LAN1 interface to the BCNetS7 protocol server of the LAN2/WiFi interface.
- The LAN2/WiFi interface can support up to 32 upper computer accesses.
- SCADA (upper configuration software) that supports OPC channels communicates with PLC in OPC mode.
- Support firmware updates on the user side through Ethernet.

Specification:
- Status display: Pwr, LAN1, LAN2, WiFi
- Diagnostic and parameter setting: IE browser, 192.168.1.188 by default, BCDevice
- Power supply: Q programming port or external 24V DC
- Voltage type: 24V DC/100mA
- Working temperature: 0 ~ 60℃
- EMC: 2014/30/EU
- Anti-vibration: 4.5mm/30Hz/10Min
- Size (L x W x H): 115 x 27 x 75mm
- Weight: 150g

WiFi interface: 802.11 b/g/n; 2.4G - 2.5G
- Interface type: external high gain antenna
- Transmission power: +26dBm (MAX, 2.4G 802.11b/g/n)
- Receiving sensitivity: -89dBm (802.11b), -74dBm (802.11g), -72dBm (802.11n)
- Wireless type: Station/AP mode
- Safety mechanism: WPA-PSK/WPA2-PSK/WEP
- Supported protocol: for TCP/IP; for UDP/IP; for S7TCP; for ModbusTCP; for BCNetS7
- Connection: max. 32

LAN1 (for PLC): Link/Active indicator, automatic polarity crossing
- Interface type: RJ45 Female x 4
- Transmission speed rate: 10/100Mbps
- Supported protocol: for TCP/IP; for UDP/IP; for S7TCP; for ModbusTCP; for BCNetS7
- Connections: max. 32

LAN2 (for upper computer): Link/Active indicator, automatic polarity crossing
- Interface type: RJ45 Female
- Transmission speed rate: 10/100Mbps
- Supported protocol: for TCP/IP; for UDP/IP; for S7TCP; for ModbusTCP; for BCNetS7
- Connections: max. 32

Package Included:
- 1 x Module
- 1 x Rubber Rod Antenna