Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP SSB-CW

Xiegu X-108G X108G Outdoor VERSION 0.5-30MHz 20W HF TRANSCEIVER QRP SSB-CW

Test Video link

Upgrade version !   Host +Handle +2.3khz filter +500Hz CW filter +0.5ppm TCXO

Included in the package are the radio, hand PTT Mic with keypad, DC connector, USB Cable

Description:
- X108G  outdoor  version is an X108 upgraded version. It is a single-conversion HF transceiver. In particular to optimize the receive channel , it has a lower local noise and higher signal to noise ratio, up 0.25uV & 12dB; the machine comes standard with a 2.3k SSB and CW filter 500Hz narrow-band filter, the filter excellent properties that dramatically improves the overall performance. The machine has a large dynamic range AGC control, so X108G when receiving various signals appear at ease; in addition, also has S meter, power meter standing, NB capabilities, to meet the daily needs of the operator. RF transmit channels using MOS pipe imports, the machine APC circuit to ensure the machine is kept constant RF output power level in each frequency band, but also according to actual needs, adjust the output power, and with a high VSWR protection. Overall performance indicators to meet the national standard, FCC (or CE) certification requirements. X108G outdoor version equipped with a color OLED solid state LCD screen, which allows you to clear outdoor viewing content displayed on the screen when you use; around all-aluminum handle configurations, to better protect the machine.


Feature:
- Low noise, single-conversion superheterodyne receiver.
- Double-balanced diode mixers provide excellent dynamic range
- Receiving sensitivity: 0.25uV (preamplifier open,> 1.8MHz band).
- Narrow double-tuned band-pass filter covering the realization of all amateur bands (WARC bands).
- Built NC APC circuit, the transmission power constant, high control accuracy.
- Standard 0.5ppm TCXO circuit of high-quality clock source.
- Narrowband standard 500Hz CW filter.
- Machine design parameters

Basic parameters:
Frequency Range: Receive: 0.5 ~ 30MHz

                           Emissions: All HAM bands
Work mode: SSB (J3E)
                           CW (A1A)
                           AM (A3E)
The minimum frequency step: 1Hz
Antenna Impedance: 50Ω
Operating temperature range: -10 ℃ ~ + 60 ℃
Frequency stability: ± 0.5ppm @ boot 5 minutes, -10 ℃ ~ + 60 ℃
Operating voltage: 12 ~ 14.5V DC
Current parameters: reception 600mAMax
                          Emission 7.5AMax
Machine size: 120 * 45 * 180 (mm) [not including knobs, handles, and other prominent]


Transmitter parameters
Transmit power: 20W (@ 13.8V)
Mode: SSB balanced modulator
                            AM modulated low
Spurious rejection: ≥40dBc
Carrier suppression: ≥45dBc
Selective: SSB 2.4kHz (-6dB)
                          CW 500Hz (-6dB)


Receiver parameters
IF frequency: 10.7MHz
Receiving sensitivity: 0.5uV (PRE ON, ≤2.0MHz)
                                0.3uV (PRE ON,> 2.0MHz)
Reception band:
1.8 ~ 2.0MHz
3.5 ~ 4.0MHz
5.0 ~ 5.5MHz
7.0 ~ 7.3MHz
10.0 ~ 10.2MHz
14.0 ~ 14.5MHz
18.0 ~ 18.2MHz
21.0 ~ 21.6MHz
24.8 ~ 25.0MHz
28.0 ~ 28.8MHz
 0.5 ~ 30.0MHz (*)
Dynamic range: better than 90dB
RIT frequency tuning range: ± 1kHz
Audio output: 0.5W@8 ohm