XJ-90 Single-Axis Programmable Controller Module Replaces PLC & Suitable for Step Motor Servo Motor

XJ-90 Single-Axis Programmable Controller Module Replaces PLC & Suitable for Step Motor Servo Motor

Description:
XJ-90 is a single-axis programmable controller in English. Using imported industrial-grade CPU chip of high performance, the controller has high reliability, high control accuracy, stable motor operation and low noise.

The controller implements practical functions with straightforward commands. It can realize a variety of complex positioning functions and non-positioning functions. At the same time, the interface of the controller is the final user interface. XJ-90 is concise and professional. It is therefore easy to operate.

Specifications:
1. Wide voltage input: DC9-24V        
2. Multiple protection: reverse connection protection, over-voltage protection and over-current protection
3. Instruction features: 16 optimized instructions (easy to remember and easy to learn to achieve a variety of complex actions)
4. Acceleration and deceleration: 1-256 levels of acceleration and deceleration setting, so that the motor starts more smoothly and quickly, and stops more accurately
5. Output frequency: 1HZ-60000Hz. Suitable for a variety of ultra-low frequency and high frequency applications
6. Input and output: 4 inputs and 4 outputs (1A load capacity can be directly connected to relays, etc.)
7. Password protection: there is a password protection function (protected program will not be changed arbitrarily, and the intellectual property rights of the program can be protected)
8. Others: automatic return to zero on power-on, automatic operation on power-on, etc.
9. Program editing and single-step debugging
10. Dimensions: 145 x 89 x 41mm/5.7 x 3.5 x 1.6". Mounting via rail clip

Package Included:
- 1 x Controller

Wiring:


Examples:
Example 1: The motor advances 10.00mm at 2000Hz with a delay of 1.00S, and the motor retreats 10.00mm at 5000Hz. The procedure is as follows:
000 Runs at 2000
001 Relative distance 10.00
002 Time delay 1.00
003 Runs at 5000
004 Relative distance -10.00
005 End instruction

Example 2: For cursor cutting control, the motor advances at 5000Hz. When a cursor signal is detected, the motor will advance another 10.00mm. Output port 0 output, control cylinder, delay 0.3S, close output port 0 and time delay 0.3S.
000 Runs at 5000
001 Continuous operation 1.00
002 Position jump 004
003 Absolute jump 002
004 Runs relative to 10.00
005 Port output DO0 on
006 Time delay 0.3
007 Port output DO0 off
008 Time delay 0.3
009 End instruction