ZEEWEII-154Pro DSO154Pro 18MHz 40MS/s Digital Oscilloscope Signal Generator for Training Repair

ZEEWEII-154Pro DSO154Pro 18MHz 40MS/s Digital Oscilloscope Signal Generator for Training Repair

Description:
The ZEEWEII DSO154Pro oscilloscope is intended for beginners. It uses a solution for ARM+FPGA+ADC. It is a practical, cost-effective mini handheld oscilloscope. It is small in stature but functional.

Features:
- High bandwidth and cost-effective. Up to 18M bandwidth (40MS/s real-time sampling rate). It can meet the measurement and maintenance of most circuits, such as automotive repair, switching power supply, audio, frequency converter, welding machine, PLC control board and CAN bus.
- Rich and powerful features. One-click automatic adjustment. It supports single triggering. 14 parameters can be measured. It also supports X100 high voltage probes.
- Comprehensive triggering capabilities. 1. Automatic triggering: Suitable for continuously present waveforms. 2. Normal triggering: Suitable for waveforms that come only once in a while. 3. Single trigger: Used to collect a single pulse or transient waveform.
- Signal generator: It can work as a signal generator and can output six waveforms, including sine, square and triangle waves. Its frequency and duty cycle are adjustable, and the amplitude is 3V (2.5V at low voltage).
- Powerful hardware solutions: It is different from those with inexpensive MCU single-chip solutions. The oscilloscope uses an FPGA + MCU + ADC scheme (users can compare its internal circuitry). The disadvantage is that when the main frequency is too high, the oscilloscope will have a slight heat, but the function and practicality are more powerful than those with 200K bandwidth.
- User-friendly design: In addition to the small and exquisite appearance, it is also very convenient to operate. With 8 buttons, automatic adjustment, stop, menu, single trigger can be completed with one button. Waveform scaling and movement only need to be switched by pressing the Mode button. There are 4 arrow keys available, making it very convenient to use.

Parameters:
- Sampling rate: 40MS/s
- Bandwidth: 18MHz
- Vertical sensitivity: 20mV/Div~10V/Div
- Time base: 50ns~10s
- Max. measured voltage: X1: ±40V; X10: ±400V (AC 220V)
- Input impedance: 1MΩ
- Trigger mode: Automatic/Normal/Single
- Coupling: AC/DC
- Signal generator: 0-500K adjustable frequency and 3.0V fixed voltage
- Measurements: 14 types, including frequency, peak-to-peak, duty cycle, and RMS
- Scroll mode: ≥ 200ms, it enters scroll mode
- Charging voltage: 5V
- Screen size: 2.4 inch. Resolution 320*240
- Weight: 80g/0.2lb (with battery)
- Size: 87 x 58 x 18mm/3.4 x 2.3 x 0.7"

Package Included:
- 1 x Oscilloscope
- 1 x P6100 Probe
- 1 x Pair of Alligator Clip Cables
- 1 x USB Cable
- 1 x Ring-shaped Stand